Setup guide

4-19
Installation and Setup Guide for Cisco Secure ACS Appliance
78-14573-02
Chapter 4 Administering the Cisco Secure ACS Appliance
Working with System Data
Tip You can enter the following parameters following the command or in response to
subsequent prompts: [server] [username] [filepath]
Step 3 Press Enter.
Step 4 At the Enter FTP Server Hostname or IP Address: prompt, enter the FTP
server IP address or hostname and press Enter.
Step 5 At the Enter FTP Server Directory: prompt, enter the FTP server filepath and
press Enter.
Step 6 At the Enter FTP Server Username: prompt, enter your FTP server username
and press Enter.
Step 7 At the Enter FTP Server Password: prompt, enter your FTP server password and
press Enter.
Step 8 At the File: prompt, enter the name you want to give the backup file and then
press Enter.
Step 9 At the Encrypt Backup File? (Y or N) prompt, type Y to encrypt the backup
file or N
not to encrypt it, and then press Enter.
Caution This procedure interrupts the use of the Cisco Secure ACS Appliance for AAA
services.
Step 10 If you previously chose to encrypt the backup file, at the Encryption Enter FTP
Server Password:
prompt, type a password and then press Enter.
Result: The Cisco Secure ACS Appliance displays the following messages:
Backing up now . . .
All running services will be stopped and restarted automatically.
Are you sure you want to proceed? (y/Y = proceed)