Setup guide

Chapter 4 Administering the Cisco Secure ACS Appliance
Working with System Data
4-16
Installation and Setup Guide for Cisco Secure ACS Appliance
78-14573-02
To export a user group list to an FTP server, follow these steps:
Step 1 Log on to the Cisco Secure ACS Appliance. For more information, see Logging
On to the Appliance via Serial Console, page 4-2.
Step 2 Type exportgroups.
Tip You can enter the following parameters following the command or in response to
subsequent prompts: [server] [username] [filepath]
Step 3 Press Enter.
Result: The system displays the following message:
Command with restart CSAuth. Are you sure you want to continue?
Caution Performing this procedure stops and restarts the csauth service and will interrupt
use of the Cisco Secure ACS Appliance.
Step 4 To proceed, type Y and press Enter.
Step 5 At the Enter IP Address or hostname of the FTP Server prompt, enter the
FTP server IP address or hostname and press Enter.
Step 6 At the Login: prompt, enter your FTP server username and press Enter.
Step 7 At the Password: prompt, enter your FTP server password and press Enter.
Step 8 At the Directory: prompt, enter the FTP server filepath and press Enter.
Result: The Cisco Secure ACS Appliance exports the group list file to the
specified location. When done the system displays following message:
Transferring ‘groups.txt’ completed
The system prompt returns.