Setup guide

Chapter 4 Administering the Cisco Secure ACS Appliance
Working with System Data
4-14
Installation and Setup Guide for Cisco Secure ACS Appliance
78-14573-02
Step 9 At the Enter FTP Server Password prompt, enter your FTP server password and
press Enter.
Result: The Cisco Secure ACS Appliance displays a series of messages detailing
the writing and dumping of the files and the stopping and starting of services. At
file transfer conclusion the system displays the following messages:
Transferring ‘Package.cab’ completed
Press any key to finish.
This indicates the Cisco Secure ACS Appliance has packaged and transferred the
.cab file as specified and restarts services.
Step 10 Press Enter.
Result: The system returns to the system prompt.
Exporting Logs
This section details the procedure for exporting Cisco Secure ACS Appliance log
files to an FTP server for further examination and processing. Using the
exportlogs command, you can either enter the name of the log or logs to exported
or select log names from a list.
Before you begin
You must have the FTP server address and filepath, as well as the proper
credentials for writing to the FTP server (username and password).
Caution Performing this procedure stops and restarts all services and will interrupt use of
the Cisco Secure ACS Appliance.
To export log files to an FTP server, follow these steps:
Step 1 Log on to the Cisco Secure ACS Appliance. For more information, see Logging
On to the Appliance via Serial Console, page 4-2.
Step 2 Type exportlogs logname.