Setup guide

Chapter 4 Administering the Cisco Secure ACS Appliance
Basic Command Line Administration Tasks
4-6
Installation and Setup Guide for Cisco Secure ACS Appliance
78-14573-02
Tracing Routes
If you are unfamiliar with the trace route command or want information on the
command’s optional arguments, see the Command Reference entry tracert,
page C-21.
To trace the network route taken by the Cisco Secure ACS Appliance to a given
destination, follow these steps:
Step 1 At the system prompt, type tracert, followed by zero or more optional arguments
and then the IP address of the target destination.
Step 2 Press Enter.
Result: The system displays the route tracing information followed by the
message:
Trace complete
Stopping Appliance Services via Serial Console
Note Stopping appliance services is a procedure that is typically performed from within
the HTML interface.
You can stop any of the Cisco Secure ACS Appliance services from the serial
console. The Cisco Secure ACS Appliance services include the following:
• CSAdmin
• CSAuth
• CSDbSync
• CSLog
• CSMon
• CSRadius
• CSTacacs