Setup guide

4-5
Installation and Setup Guide for Cisco Secure ACS Appliance
78-14573-02
Chapter 4 Administering the Cisco Secure ACS Appliance
Basic Command Line Administration Tasks
Note Status determination is typically performed from within the Cisco Secure
ACS Appliance HTML user interface. For more information, see
“Determining the Status of Cisco Secure ACS Services” in the User
Guide for Cisco Secure ACS Appliance.
To determine the status of the Cisco Secure ACS Appliance and the Cisco Secure
ACS Services, follow these steps:
Step 1 Log on to the Cisco Secure ACS Appliance. For more information, see Logging
On to the Appliance via Serial Console, page 4-2.
Step 2 At the system prompt, type show, and then press Enter.
Result: The system displays the following status information:
Cisco Secure ACS Appliance Name
Cisco Secure ACS Appliance Version
Appliance Management Software Version
Appliance Base Image Version
Session Timeout (in minutes)
Current Date & Time
Time Zone
NTP Server(s)
CPU Load (percentage)
Free Disk (amount of hard drive space available)
Free Physical Memory
Appliance IP Configuration
DHCP Enabled (Yes/No)
IP Address
Subnet Mask
Default Gateway
DNS Servers
ACS Services (running/stopped)
CSAdmin
CSAuth
CSDbSync
CSLog
CSMon
CSRadius
CSTacacs