Setup guide

Chapter 4 Administering the Cisco Secure ACS Appliance
Basic Command Line Administration Tasks
4-4
Installation and Setup Guide for Cisco Secure ACS Appliance
78-14573-02
Logging Off the Appliance via Serial Console
To log off the Cisco Secure ACS Appliance via the serial console, follow these
steps:
Step 1 At the system prompt, type exit.
Step 2 Press Enter.
Result: The serial console connection closes, and the
login: prompt reappears.
Rebooting the Appliance via Serial Console
To reboot the Cisco Secure ACS Appliance via the serial console, follow these
steps:
Step 1 Log on to the Cisco Secure ACS Appliance. For more information, see Logging
On to the Appliance via Serial Console, page 4-2.
Step 2 At the system prompt, type reboot, and then press Enter.
Result: The Cisco Secure ACS Appliance displays the following message:
Are you sure you want to reboot? (Y/N)
Step 3 Type Y for yes and then press Enter.
Result: The Cisco Secure ACS Appliance reboots. When the reboot is finished,
the
login: prompt reappears.
Determining the Status of Appliance System and Services via
Serial Console
You can use the serial console connection to obtain system and service status
information.