Setup guide

4-3
Installation and Setup Guide for Cisco Secure ACS Appliance
78-14573-02
Chapter 4 Administering the Cisco Secure ACS Appliance
Basic Command Line Administration Tasks
Note There is only one set of Cisco Secure ACS Appliance login credentials
(administrator name and password) that have the serial connection privilege.
Shutting Down the Appliance via Serial Console
Caution Powering off the Cisco Secure ACS Appliance by using the Power button may
cause the loss or corruption of data. Use this procedure to shut down the Cisco
Secure ACS Appliance.
To use the serial console to shut down the Cisco Secure ACS Appliance, follow
these steps:
Step 1 Log on to the Cisco Secure ACS Appliance. For more information, see Logging
On to the Appliance via Serial Console, page 4-2.
Step 2 At the system prompt, type shutdown, and then press Enter.
Step 3 At the Are you sure you want to shut down? (Y/N) prompt, type Y for yes
and then press Enter.
Result: The Cisco Secure ACS Appliance displays the following message:
Shutting down the system (This may take several minutes)
The Cisco Secure ACS Appliance then ends operations and powers OFF.