Setup guide

Chapter 3 Installing and Configuring the Cisco Secure ACS Appliance

Initial Configuration

3-20

Installation and Setup Guide for Cisco Secure ACS Appliance

78-14573-02

Step 14 At the Enter desired time zone index (0 for more choices): prompt, type

the index number of the time zone you want set, and then press Enter.

Result: The system displays the new time zone.

Step 15 At the Synchronize with NTP server? [N]: prompt, do one of the following:

• To set the time manually, type N, and then press Enter.

• To use an NTP server for setting time, type Y, and when prompted enter

the IP address of the NTP server you want to use.

Result: The system displays a confirmation message reflecting your choice

Step 16 At the Enter date [mm/dd/yyyy]: prompt, type the date in the given format, and

then press Enter.

Step 17 At the Enter time [hh:mm:ss]: prompt, type the current time in the given

format, and then press Enter.

Result: The system displays the following message on the console:

Initial configuration is successful. Appliance will now reboot.

The system reboots.

Verifying the Initial Configuration

To verify that you have correctly completed the Cisco Secure ACS Appliance

initial configuration, follow these steps:

Before You Begin

Establish a serial console connection to the Cisco Secure ACS Appliance. For

details see Establishing a Serial Console Connection, page 3-14.

Step 1 Reboot the Cisco Secure ACS Appliance. For more information, see Rebooting

the Appliance via Serial Console, page 4-4.

Result: When the systems finish booting, a

console.