Setup guide

Chapter 3 Installing and Configuring the Cisco Secure ACS Appliance
Installing the Cisco Secure ACS Appliance
3-10
Installation and Setup Guide for Cisco Secure ACS Appliance
78-14573-02
Figure 3-4 Cable Support Bracket Installation
Step 4 Insert the chassis into the rack:
a. Align the rear of the chassis with the front of the rack rails.
b. Slide the chassis into the rack; ensure that the fixed rails on the chassis slide
inside the rack rails.
Caution The rack-mount kit is not intended for use as a slide rail system. You must
complete installation by securely fastening the chassis into the rack.
c. Secure the chassis to the rack by tightening the two thumbnuts on the front
panel of the chassis. (See Figure 3-2.)
d. At the rear of the rack, tighten the fixed cable tray support bracket thumbnut
to secure the tray to the cable support bracket. (See Figure 3-5.)
e. Also at the rear of the rack, slide the fixed cable tray rail thumbnut to align
with one of the screwholes on the rack rail. Tighten the thumbnut.
1 Hook on support bracket 2 Cable support bracket thumbnut
1
2
104987