Setup guide

3-9
Installation and Setup Guide for Cisco Secure ACS Appliance
78-14573-02
Chapter 3 Installing and Configuring the Cisco Secure ACS Appliance
Installing the Cisco Secure ACS Appliance
Figure 3-3 Fixed Cable Tray Installation
Step 3 Attach the cable support bracket:
a. Remove the access panel. (See Accessing Internal Components, page 3-5).
b. On the left side of the back panel, hook the cable support bracket to the
chassis. See Figure 3-4.
c. Use the cable support bracket thumbnut to fasten the cable support bracket to
the back of the chassis.
d. Replace the access panel.
1 Fixed cable tray post
104985
1