Setup guide

Chapter 3 Installing and Configuring the Cisco Secure ACS Appliance
Quick Reference
3-2
Installation and Setup Guide for Cisco Secure ACS Appliance
78-14573-02
Quick Reference
Table 3-1 provides a high-level overview of the installation process.
Table 3-1 Quick Reference
Task Steps References
Install rack rails.
1. Adjust length of rack rails.
2. Attach rack rails to rack.
Installing the Cisco Secure ACS
Appliance in a Rack, page 3-6
Attach the fixed cable tray to the
back rail post.
Insert fixed cable tray post into
rail slot.
Installing the Cisco Secure ACS
Appliance in a Rack, page 3-6
Attach the cable support bracket
to the chassis.
1. Remove access panel.
2. Hook cable support bracket
to the chassis.
3. Fasten cable support bracket
thumbnut to the chassis.
4. Replace access panel.
Accessing Internal Components,
page 3-5
and
Installing the Cisco Secure ACS
Appliance in a Rack, page 3-6
Insert the Cisco Secure ACS
Appliancechassis into the rack.
1. Slide chassis into rack.
2. Secure front panel
thumbnuts.
3. Secure fixed cable tray to
cable support bracket.
4. Fasten cable tray thumbnut
to rail.
Installing the Cisco Secure ACS
Appliance in a Rack, page 3-6
Route and connect cables.
1. Plug the network connection
into the Ethernet NIC 1 port.
2. Connect a terminal to the
console serial port.
Connecting Cables, page 3-11
Connect to a power source. Connect to an AC power source. Connecting to Power Source,
page 3-13
Power on the Cisco Secure ACS
Appliance
Press the power switch. Powering On the Cisco Secure
ACS Appliance, page 3-13