Setup guide

Chapter 2 Preparing for Installation
Safety
2-2
Installation and Setup Guide for Cisco Secure ACS Appliance
78-14573-02
The following warnings and cautions are provided to help you prevent injury to
yourself or damage to the devices:
Warning IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause
bodily injury. Before you work on any equipment, be aware of the hazards
involved with electrical circuitry and be familiar with standard practices for
preventing accidents. To see translations of the warnings that appear in this
publication, refer to the translated safety warnings that accompanied this
device.
Note: SAVE THESE INSTRUCTIONS
Note: This documentation is to be used in conjunction with the specific
product installation guide that shipped with the product. Please refer to the
Installation Guide, Configuration Guide, or other enclosed additional
documentation for further details.
Warning The safety cover is an integral part of the product. Do not operate the unit
without the safety cover installed. Operating the unit without the cover in place
will invalidate the safety approvals and pose a risk of fire and electrical
hazards.
Warning Never defeat the ground conductor or operate the equipment in the absence of
a suitably installed ground conductor. Contact the appropriate electrical
inspection authority or an electrician if you are uncertain that suitable
grounding is available.
Warning Before working on a chassis or working near power supplies, unplug the power
cord on AC units; disconnect the power at the circuit breaker on DC units.
Warning Before opening the chassis, disconnect the telephone-network cables to avoid
contact with telephone-network voltages.