Setup guide

C-19
Installation and Setup Guide for Cisco Secure ACS Appliance
78-14573-02
Appendix C Command Reference
Commands
Example
The following command shuts down the appliance:
shutdown
start
To start one or more of the ACS services, use the start command.
start [service name(s)]
Syntax Description
This command uses as an argument the name of the service or services to be
started.
Usage Guidelines
Use the start command to start any ACS service. You can determine the status of
each service by using the show command. For more information, see Starting
Appliance Services via Serial Console, page 4-7.
Example
The following command starts the CSAuth and CSadmin services:
restart csauth csadmin
stop
To stop one or more of the ACS services, use the stop command.
stop [service name(s)]
Note Services subject to this command are halted until restarted. This may interfere
with AAA services.