Setup guide

C-17
Installation and Setup Guide for Cisco Secure ACS Appliance
78-14573-02
Appendix C Command Reference
Commands
Example
The following command initiates the system ip setting procedure:
set password
set time
To set the Cisco Secure ACS Appliance time zone, NTP server, date, or time, use
the set time command:
set time
Syntax Description
This command has no arguments or keywords.
Usage Guidelines
Use the set time command to begin the setting of the timezone, current date, and
current time. Subsequent prompts take you through the process. For more
information, see Setting the System Time and Date Manually, page 4-28.
You can also use the set time command to enable an NTP server to synchronize
the Cisco Secure ACS Appliance. For more information, see Setting the System
Time and Date with NTP, page 4-29.
Example
The following command initiates the system time setting procedure:
set time
set timeout
To set the period, in minutes, after which the serial console will time out, use the
set timeout command.
set timeout [minutes]