Setup guide

Appendix C Command Reference
Commands
C-16
Installation and Setup Guide for Cisco Secure ACS Appliance
78-14573-02
set ip
To set the Cisco Secure ACS Appliance IP configuration, use the set ip command.
set ip
Syntax Description
This command has no arguments or keywords.
Usage Guidelines
Use the set ip command to reset the system IP address in response to subsequent
prompts. For more information, see Reconfiguring the Appliance IP Address,
page 4-26.
Example
The following command begins the system IP address configuration.
set ip
set password
To set the Cisco Secure ACS Appliance administrator’s password, use the set
password command. Subsequent prompts take you through the process.
set password
Syntax Description
This command has no arguments or keywords.
Usage Guidelines
Use the set password command to begin resetting the administrator’s password.
Subsequent prompts take you through the process. For more information, see
Resetting the Appliance Administrator Password, page 4-24.