Setup guide

Appendix C Command Reference
Commands
C-12
Installation and Setup Guide for Cisco Secure ACS Appliance
78-14573-02
Note AAA services are temporarily halted while this command executes.
Syntax Description
This command has no arguments or keywords.
Example
The following command causes a soft reboot of the Cisco Secure ACS Appliance:
reboot
restart
To restart one or more of the ACS services, use the restart command.
restart [service name(s)]
Note AAA services are temporarily halted while this command executes.
Syntax Description
This command uses as an argument the name of the service or services to be
restarted.
Usage Guidelines
Use the restart command to stop and restart any of the ACS services. You can
determine the status of each service by using the show command. For more
information, see Restarting Appliance Services via Serial Console, page 4-9.
Example
The following command restarts the CSAuth and CSAdmin services:
restart csauth csadmin