Setup guide

Chapter 4 Administering the Cisco Secure ACS Appliance
Recovery Management
4-42
Installation and Setup Guide for Cisco Secure ACS Appliance
78-14573-02
Step 5 Type Y.
Result: The Cisco Secure ACS Appliance processes the new image (this may take
more than 2 minutes) while displaying odd characters and then displays the
following message on the console:
The system has been reimaged successfully. Please remove this recovery
CD from the drive, then hit RETURN to restart the system:
Step 6 Remove the Recovery CD from the Cisco Secure ACS Appliance.
Step 7 Press Enter to restart the Cisco Secure ACS Appliance.
Result: The Cisco Secure ACS Appliance reboots, performs some configurations,
and reboots again. The configurations that occur after the first reboot take a
significant amount of time, during which there is no feedback; this is normal
system behavior.
Note After re-imaging the appliance hard drive, you must once again perform initial
configuration of the Cisco Secure ACS Appliance. For detailed instructions, see
Configuring the Cisco Secure ACS Appliance, page 3-15.