Setup guide
Chapter 4 Administering the Cisco Secure ACS Appliance
Reconfiguring Appliance System Parameters
4-30
Installation and Setup Guide for Cisco Secure ACS Appliance
78-14573-02
To set the Cisco Secure ACS Appliance system time and date manually, see
Setting the System Time and Date Manually, page 4-28.
To set the Cisco Secure ACS Appliance system time and date with NTP, follow
these steps:
Step 1 Log on to the Cisco Secure ACS Appliance. For more information, see Logging
On to the Appliance via Serial Console, page 4-2.
Step 2 At the system prompt, type set time, and then press Enter.
Result: The system displays the following message on the console:
Current Date Time Setting:
Time Zone: (GMT -xx:xx) XXX Time
Date and Time: mm/dd/yyyy hh/mm/ss
NTP Servers: (“Ntp Synchronization Disabled” - or - List of NTP
servers)
Change Date & Time Setting? [N]
Step 3 To set the time zone, time, or date type Y, and then press Enter.
Result: The system lists indexed time zones and the following message:
[xx] (GMT -xx:xx) XXX Time.
Enter desired time zone index (0 for more choices) [x]:
Step 4 Enter the desired time zone index number from the time zone setting list, and then
press Enter.
Tip You can also type 0 (zero) and press Enter to see more time zone index numbers;
or simply press Enter to accept the existing time zone.
Result: The system displays the time zone setting.
Step 5 At the Synchronize with NTP Server? prompt, type Y, and then press Enter.
Step 6 At the Enter NTP Server IP Address: prompt, enter the IP address of the NTP
server you want to use, and then press Enter.