Specifications

28
5b. TRACK PLATE REPLACEMENT
1. The gray shaded area, in FIG 7b, is the ‘track plate’ guide path.
FIG 7b.
2. Once the ‘track plate’ is in position, turn the track through 720
0
to ensure it is seated in the guide path correctly.
5c. FINAL DRIVE GEAR REPLACEMENT
1. Once the ‘elevator track’ is in place, the ‘final drive gear’ can be fitted by placing the gear over its mounting spindle,
while lining the teeth up with the secondary drive gear, adjust the ‘elevator track’ so that the gear falls into place. FIG
7c.
2. The end plate can now be re-fitted. See section 6.