Specifications

M
ulti
-
format HD Video Scaler
15
To adjust the picture quality, use the▲ or ▼ buttons to move the
highlight bar to the desired item and then press the MENU to confirm
your selection. At this point, the selected parameter will turn red, you can
then use the ▲, ▼ buttons to increase or decrease the value of the
parameter. When the adjustment has been completed; press the MENU
button to leave that parameter. Move the highlight bar to EXIT, and then
press the MENU button to exit.
Note: The "H-position" and "V-position" are only available when the
component or PC (VGA) input is selected
Picture mode - There are 4 picture modes to choose from:
User: Select to adjust the parameters to your favorite levels and then
automatically store it.
Standard: Standard factory default settings for optimal display
Vivid: High saturation picture for optimal display in a bright room.
Movie: Picture for comfortable low brightness display in a dark room.
Scale - select over-scan when the input source is SD or HD video to
ensure there is no black band around screen boundary. Select under-scan
when input source is a PC signal to ensure entire contents (all the way to
the edge) are within the screen boundary.
Mirror – Select mirror to horizontally flip the image. This is useful for
teleprompting and rear projection systems.
Noise Reduction - This function only works when the input source is
analog RGB or component. It will not work for the DVI input. There are
four steps of Noise Reduction: Off, Low, Middle, High. The Noise
Reduction will remove the noise that results from the analog to digital
conversion and digital scaling process.
H & V position – Adjusts the horizontal and vertical position of the
image.