Network Hardware User Manual

724-746-5500 | blackbox.com

Page 43

AC1132A

Chapter 5: Web Management

• Subnet Mask: The default value is 255.255.255.0

• Default Gateway: The default value is 192.168.100.10

• DNS Server: The default value is 192.168.100.10

DHCP Server Setup:

• You can select “auto Enable/Disable DHCP Server” or “Disable.”

• Start IP: The start IP address of DHCP Server.

• End IP: The end IP address of DHCP Server

• Subnet Mask: The default value is 255.255.255.0

• Default Gateway: The default value is 192.168.100.10

• DNS Server: The default value is 192.168.100.10

Wireless Setup:

• Wireless LAN: The default value is “Enable.”

• Connect to Existing AP: Input the SSID of the Wi-Fi AP you want to connect to.

• Region: The default value is “Worldwide.”

• SSID: SSID string, max. length is 32 bytes.

• SSID Broadcast: The default value is “Enable.”

• Channel: Use to set fixed channel or Auto. The “Auto” means after powering on the Wireless Video Presentation System, it will

scan all wireless channels and select one channel automatically.

• Encryption: Select “Disable” or one of WEP/WPA/WPA2 64 bit or 128 bit in ASCII or HEX string.

• Key: If Encryption is enabled, you have to set the key value according to the encryption mode you selected.

Gatekeeper:

Gatekeeper is designed for ensuring the enterprise network security within the Wireless Video Presentation System box.

• All Pass: Allows Guest Users to access all office networks and Internet.

• All Block: Blocks Guest Users to access all office networks (LAN).

• Internet Only: Blocks Guest Users from office networks (LAN) but still reserves Internet connection capability, if available.

Apply: Press button to select this mode.

Cancel: Press button to abort action.