Technical data

Page 8 of 52
Gas Burner Construction
Take some time to review the burner construction taking note of the
positions of the main components and the required connections. The
burner is pre-fitted to the enclosure – do not remove it.
Before starting to install the appliance review the Data Plate fitted to the
appliance for the gas type and pressure requirements of the appliance. Ensure
these are correct for the property supply.
This Fire has a battery remote control system and requires only the connection
of an 8mm gas supply. The remote is operated via a handset and infra red
magic eye positioned on the appliance.
The burner is pre fitted to the enclosure. There is no reason to remove it.
All CVO fires are given a 100% full function test at the factory before being
shipped. We record over 40 test settings to ensure the fire operates correctly
and inline with the CE approval document.
There are no adjustable parts on this fire. Never remove any wires
from the black box or the remote system. All connections are required.
DO NOT DISMANTLE THE FIRE AS IT WILL INVALIDATE THE
WARRANTY.