Technical data

Page 47 of 52
Replacing the Batteries
Main Appliance Batteries
To ensure a long life use a set of brand new lithium batteries. Always
replace all 6 batteries at the same time otherwise the alarm will
continue to sound. The remote has a memory and will highlight old
batteries being used. If the remote alarm indicates that the batteries are
“flat” do not use the appliance. Ensure the appliance is switched off and has
had time to “cool down” before starting to replace the batteries. Lift the front
shelf of the appliance taking care not to scratch the sides of the enclosure. Lift
the battery cover and lift out the battery pack. Do not pull on the wires or they
will be damaged. Remove the old batteries and wait for the alarm to sound
again. Wait a further 2 minutes then fit 6 x AA batteries in the correct order
and replace the battery pack in the holder, ensuring that no wires are
disconnected. Replace the battery cover. Do not use the appliance with the
battery cover open. Refit the front shelf. SEE IMAGES BELOW: