Technical data

Page 37 of 52
Converting the Fire To Mains Supply
This must be done by a GAS SAFE Engineer and trained
electrician.
1. Parts Required:
a. Mains Power Adaptor
b. Mains Power Connector
c. These are available as optional spare parts from the customer
service department. Call 01325-327221
2. Procedure
a. Remove the remote heat shield and disconnect the battery
pack, supply lead and reset switch from the fire.
b. Replace the reset switch with the power supply cable.
c. Connect the power adaptor to the supply cable.
d. Connect the power adaptor to the mains supply.
e. SEE IMAGES BELOW