Technical data

Page 17 of 52
Gather Unit
If the standard gather is not used, the flue must be connected to the enclosure
in accordance with GAS SAFE and local regulation.
The gather has been designed to allow it to be inserted into the chimney
opening and held up while the fire enclosure is installed. The gather must then
be attached to the enclosure using the screws provided and sealed with fire
cement. When using a flue liner the gather must be sealed to the liner by fire
cement.
Gas and Battery Connection.
The gas line should now be connected to the 8mm inlet isolation valve. The
battery pack should also now be connected ready for commissioning the burner.
The front shelf is left off at this stage.