Technical data

Page 6 of 44
Unpacking the Appliance
Read these instructions fully before proceeding.
Carefully examine the carton for damage before unpacking. If it is
obviously damaged, consult the supplier over whether to proceed.
Remove the fire and examine its general condition. Any damage or
defects must be reported “before” installing the appliance. No
claims will be accepted for damage after the appliance has been
installed.
If satisfied by the condition proceed with the installation.
The installation should only be carried out by a CORGI Registered
fitter and in accordance with national and local Regulations for both
gas and electricity.
The installation must also be in accordance with relevant parts of
local and national building regulations.
For the Republic of Ireland, reference should be made to IS813 and
ICP3 and any guidance notes from Bord Gais.
Failure to have the fire fitted by a qualified person nullifies ALL
guarantees.