Technical data

Page 5 of 44
Introduction
This appliance is supplied as a complete suite of enclosure of gas fire burner
unit, enclosure and fascia. To comply with the approval this fire must be
installed as designed.
The fascia must be installed as intended and ventilation to the burner must be
provided. Special notice should be taken for the requirements of both the metal
and stone fascia versions as the enclosure must be installed differently.
An optional gather is available upon request to attach the enclosure to a
200mm Flue Liner. This should be ordered with the appliance however if this
has been missed this can be ordered from Customer Services on 01325-
327221. Depending on the stock situation this may take a number of days.
This is a high power appliance and a steady gas supply within +/- 1mBar of the
approved pressure must be maintained at all times. Inlet is via an 8mm gas
line. If the gas line is longer than 1.5mtrs then the gas line should be increased
in diameter to 15mm and possibly larger depending on the length of gas pipe
required.
LPG Version. If running n Gas Bottles two 47Kg bottles with regulator and
changeover valve will be required. Failure to do this will result in nuisance
shutdowns.
This appliance requires a 240v 3A fused spur next to the appliance and
within easy access of the user.