Technical data

Page 50 of 56
How to Shutdown if the Handset is Faulty and
the Fire is Lit
The appliance has a safety shut down switch which is built into the remote
system. This is in the form of a button fitted inside the appliance. In the
unlikely event that the wall switch is not fitted and the handset is lost,
damaged or broken while the fire is lit the fire can be shutdown by pressing
this button.
Safety Shutdown Procedure
• Carefully lift the front shelf taking care that the appliance will be hot.
• The reset button is fitted to the top of the remote shield.
• Carefully insert hand below the shelf taking care not to touch any hot
surfaces.
• Press and hold the button for up to 60 seconds.
• The appliance will shut down.
• Taking great care not to touch any hot surfaces, carefully remove your
hand and replace the front shelf.
• Do not use the appliance until the handset has been repaired or
replaced.
•
To purchase a new handset call 01325-327221.
•
If the fire has been converted to mains supply the reset button is
replaced with the adaptor socket. To shutdown this version,
unplug the adaptor.