Technical data

Page 27 of 56
Positioning the Magic Eye
The Magic eye is supplied within the burner housing.
Great care should be taken when handling this component. The eye should be
positioned on the wall under the lower stone pieces with the curved/domed
face forward.
There must be direct “line of sight” between the hand set and the magic eye
to ensure the hand set works correctly and efficiently.
Once the fire is fully installed it is ready to be commissioned, this must be
done by a GAS SAFE ENGINEER who will take full responsibility for the final
installation. Read the section later in this manual “Lighting the Fire” to
familiarise yourself with this procedure.