Technical data

Page 25 of 56
ITEMS L – J – K
Use Fire Cement on the sides and along the top to bond the stone to the wall.
The stone should be central and spaced equally on both sides. Take note of
the comments on the previous page regarding spacing the lower pieces [see
image on page 23].
LOWER TRIM.
ITEMS G – H - I
Using Silicone Fire Cement bond the two smaller sections to the wall ensuring
they are inline with the upper trim. Take part G and bond this to the three
lower struts ensuring it is in line with the rear trim pieces. This will need fixing
with metal tape or another suitable method to ensure it stays fixed until the
glue dries. See image on page 25.
Note: the lower section must be left open as it provides burner ventilation.