Technical data

Page 24 of 56
WARNING: The stone trim is supplied in 6 pieces. Take time to review the
polished sides and unpolished sides. The unpolished side must be bonded to
the wall. To bond the stone use high temperature silicone fire cement or a
high temperature instant grab adhesive.
UPPER TRIM
The upper trim must be fitted to allow the stone shelf to be removed when the
fire needs to be commissioned and also for servicing. To do this a small gap of
2mm gap is required under the side trims before they are bonded to the wall.
This can be achieved by using a small piece of cardboard or plastic which can
be removed when the glue is dry. [see image]