Technical data

Page 14 of 56
Bronze Version
This is the same size as the Stone Version with only minor differences. If in
doubt about assembling the Bronze version please call 01325-327221.
Burner Construction
Every CVO Fire is tested for 1 hour at the factory. This includes 44 individual
function checks. This ensures the appliance is supplied in a fully working
condition.
Take some time to review the burner construction taking note of the positions
of the main components and connections.
• Three Connections are required:
o Mains 240v Supply via 3A fused spur
o Gas Connection via 8mm Isolation Valve.
WARNING: Removal of the connections from the remote system or the
grommets marked “Electric Supply” or “Hard Wire switch lead” as
shown in the burner construction drawings will result in the warranty
being invalidated. No claims will be accepted for damage caused by the
burner being tampered with.
DO NOT REMOVE THE HEAT SHIELD
DO NOT CHANGE THE BURNER AERATION.
DO NOT CHANGE THE BURNER PIPE WORK