VSW-HDMI8X8-B 8 x 8 HDMI Matrix Switch Switch (8) HDMI source devices plus IR BLACK BOX to (8) HDMI displays. ® Supports 1080p 3D HDMI or DVI formats + IR with RS-232 or IR remote control. Customer Support Information Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 Web site: www.blackbox.
Trademarks Used in this Manual Trademarks Used in this Manual Black Box and the Double Diamond logo are registered trademarks of BB Technologies, Inc. Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners. Blu-ray is a trademark of the Blu-ray Disc Association. HDMI is a registered trademark of HDMI Licensing L.L.C. Xbox and Windows are registered trademarks of Microsoft Corporation.
FCC and IC RFI Statements Federal Communications Commission and Industry Canada Radio Frequency Interference Statements This equipment generates, uses, and can radiate radio-frequency energy, and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interference to radio communication.
NOM Statement Instrucciones de Seguridad (Normas Oficiales Mexicanas Electrical Safety Statement) 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura. 3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de operación deben ser respetadas. 4. Todas las instrucciones de operación y uso deben ser seguidas. 5.
Safety Information Safety Information NOTE: THIS SAFETY INFORMATION IS OF A GENERAL NATURE AND MAY BE SUPERSEDED BY INSTRUCTIONS CONTAINED WITHIN THIS MANUAL. 1. Save the carton and packing material even if the equipment has arrived in good condition. .If you ever need to ship the unit, use only the original factory packing. 2. Read all documentation before operating your equipment. Retain all documentation for future reference. 3. Follow all instructions printed on unit chassis for proper operation. 4.
Important Safety Instructions IMPORTANT SAFETY INSTRUCTIONS To get the best from this product, please read this manual carefully. Keep it in a safe place for future reference. To reduce the risk of electric shock, do not remove the cover from the unit. No user serviceable parts inside. Refer servicing to qualified personnel. To reduce the risk of fire, do not expose the unit to rain, water or excessive moisture. Do not force switched or external connections.
Table of Contents Table of Contents 1. Specifications..........................................................................................................................................................................8 2. Overview ...............................................................................................................................................................................9 2.1 Introduction.................................................................................
Chapter 1: Specifications 1. Specifications Controls — IR remote control, IR external port with (1) 3.5-mm earphone jack, Select and Function buttons on front panel, RS-232 series interface Digital Audio Support — Multi audio formats 5.1/7.1, MAT (MLP), Dolby Digital, Dolby TrueHD, Dolby Digital Plus, DTS, DTS-ES 6.
Chapter 2: Overview 2. Overview 2.1 Introduction The HDMI8X8 is a high-performance 8x8 matrix routing switch for HDMI signals. This switch supports data rates up to 6.75 Gbps, enabling 1080p HDMI formats and UXGA/WUXGA/DVI resolution to any HD display. High Definition Digital signals can be selected and distributed to any eight outputs simultaneously. The switch is certified as being fully HDMI® and HDCP compliant, with RoHS, CE, and FCC certification.
Chapter 2: Overview • RS-232 cable • 100–230 VAC, 12 VDC, 5A universal power supply • 19-inch rackmount brackets • User manual 2.4 Hardware Description Figures 2-1 and 2-2 show the front panel of the switch, and Figure 2-3 shows its back panel. Tables 2-1 and 2-2 describe the components. 2.4.1 Front Panel 1 3 2 5 6 4 7 Figure 2-1. Front-panel diagram #1. 9 11 12 13 8 10 14 Figure 2-2. Front-panel diagram #2. Table 2-1. Front-panel components.
Chapter 2: Overview Table 2-1 (Continued). Front-panel components. Number Component 8 Function Key — OFF 9 Function Key — RECALL (preview) Description Disables (mutes) video to selected channels. • Press the OFF button followed by any destination channel. • Press button 1 through 4 to select the output destination. The display will show “0” for the selected channel indicating no video selected. The system will show previously stored presets, up to a total of 16.
Chapter 2: Overview Table 2-2. Rear-panel components. Number 1 Component DC Power Inlet Connector Connector Descripton Power jack: DC jack: inner OID 2.1mm Power input: 12 VDC, 5 A Component Description Disables (mutes) video to selected channels. • Press the OFF button followed by any destination channel. • Press button 1 through 4 to select the output destination. The display will show “0” for the selected channel indicating no video selected.
Chapter 3: Installation 3. Installation 3.1 Installation Diagram Figure 3-1 shows a sample application using the 8x8 HDMI Matrix Switch. Displays Display Projector VX-HDMI-TP-100M Transmitter HDTV 8x8 HDMI Matrix Switch (VSW-HDMI8x8-B) VX-HDMI-TP-100M Receiver IR receiver PC Blu-ray Xbox PS/3 HD satellite receiver PC PC Laptop Figure 3-1. Typical application using the 8 x 8 HDMI Matrix Switch. 724-746-5500 | blackbox.
Chapter 3: Installation 3.2 IR Extender Figure 3-2. IR extender connection. NOTE: When you plug the external IR extender into the switch, the front panel IR receiver remains active. STEP 1 STEP 2 STEP 3 Figure 3-3. How to set up the IR extender components: Steps 1-3. Page 14 724-746-5500 | blackbox.
Chapter 4: Operation 4. Operation 4.1 EDID Setup Table 4-1. EDID function for HDMI matrix switch. Step Number Action Result Step 1 Press the EDID button The display will show the currently selected EDID mode. Step 2 Press the SOURCE #1 or #2 button row The button will flash blue and the display will show the current Embeddd EDID status. Step 3 Press the ENTER button To set EDID mode. The switch will return to operation mode. 4.2 Embedded EDID Modes NOTE: Does only work with HDMI displays.
Chapter 4: Operation Table 4-3. Copy EDID to single input. Step Number Action Result Step 1 Press the EDID button The button will flash blue and the display will show the current Embedded EDID Status. Step 2 Press one of the Destination buttons #1-8 Copy EDID. from the selected destination. Step 3 Press one of the source buttons #1-8 Copy to the Destination EDID to the selected source. Step 4 Press the ENTER button Confirm entries. Table 4-4. Copy EDID to multiple inputs.
Chapter 4: Operation 4.5 How to Set Up Fast Speed Start (FSS) Function Table 4-7. Setting up Fast Speed Start (FSS) function. Step Number Action Result Step 1 Press the Destination #1–8 button row, then press the Source #1–8 button row To set up and install all devices. Step 2 Press EDID button Select an optimum status of Embedded EDID mode. Step 3 Press the ENTER button Confirm entries. Step 4 Press the EDID button Select the EDID FSS mode. Step 5 Press the ENTER button Confirm entries.
Chapter 4: Operation 4.8 Front-Panel Control Functions See Chapter 2. 4.9 Remote Control Before making any connections to the switch, observe the following: • Make sure that the voltage supply matches the label on the supplied plug (±10%). • Make sure that the power switch is OFF. • Make sure that all system grounds are connected to a common point. • Avoid powering equipment with a system from multiple power sources that may be separated by large distances.
Chapter 4: Operation 4.
Chapter 5: RS-232 Serial Interface 5. RS-232 Serial Interface RS-232 SERIAL INTERFACE CONNECT A PC OR CONTROL SYSTEM. VERSION COMPATIBLE V2.0 For a complete list of commands, refer to the extended RS-232 Protocol Instruction Manual. Figure 5-1. RS-232 DB9 connector. Table 5-1. RS-232 serial interface pinouts.
Chapter 6: Troubleshooting 6. Troubleshooting 6.1 Contacting Black Box If you determine that your 8X8 HDMI Matrix Switch is malfunctioning, do not attempt to alter or repair the unit. It contains no user-serviceable parts. Contact Black Box Technical Support at 724-746-5500 or info@blackbox.com. Before you do, make a record of the history of the problem. We will be able to provide more efficient and accurate assistance if you have a complete description, including: • the nature and duration of the problem.
NOTES Page 22 724-746-5500 | blackbox.
NOTES 724-746-5500 | blackbox.
Black Box Tech Support: FREE! Live. 24/7. Tech support the way it should be. Great tech support is just 30 seconds away at 724-746-5500 or blackbox.com. About Black Box Black Box provides an extensive range of networking and infrastructure products. You’ll find everything from cabinets and racks and power and surge protection products to media converters and Ethernet switches all supported by free, live 24/7 Tech support available in 30 seconds or less. © Copyright 2013. Black Box Corporation.
