Network Hardware User Manual

Page 66
724-746-5500 | blackbox.com
LB308A
Chapter 5: Web-Based Browser Management
5. Point to Point Link: Click on the “Point to Point Link” drop-down menu to
Choose “Enable” or “Disable” from “Point to Point Link” drop-down list to
enable or disable Point to Point Link for the port.
6. Edge Port: Click on the “Edge Port” drop-down menu to Choose “Enable”,
“Disable”, or “Auto” from “Edge Port” drop-down list to set Enable, Disable, or
Auto Edge Port for the port.
7. Update setting: Click on the “Update setting” button when you finish the RSTP
Port Setting.
Figure 5-29. Update Setting button.