Network Hardware User Manual

Page 10
724-746-5500 | blackbox.com
LB308A
Quick Start Guide
Figure QS-2. switch_a> prompt.
5. Log on to Privileged Exec Mode (Enable Mode): At the “switch_a>” prompt,
type “enable” and press “Enter” to log on to Privileged Exec Mode (or Enable
Mode). The “switch_all” prompt will show on the screen.
6. Log on to Configure Mode (Configure Terminal Mode): At the “switch_all”
prompt, just type in “configure terminal” and press Enter to log on to
Configure Mode (or Configure Terminal Mode). The “switch_a(config)#”
prompt will show on the screen.
Figure QS-3. switch_a(config)# prompt.