Specifications

724-746-5500 | blackbox.com

Page 7

Chapter 2: Overview

2. Overview

2.1 Introduction

Control your rack- or cabinet-mounted PS/2 server with the compact, easy-to-use ServTray. It consists of a keyboard (Japanese

version), mouse, LCD panel, and KVM module housed in an industry-standard 19", 1U-height console drawer (see Figure 2-1).

Two models are available: the ServTray with a 15" LCD panel (KVT201A-JP-R3) and the ServTray with a 17" LCD panel

(KVT202A-JP-R3). Both models feature a full 105-key, low-profile, sturdy keyboard and touch pad with an ergonomically designed

hand rest. The KVT201A-JP-R3 has a maximum resolution of 1024 x 768, and the KVT202A-JP-R3 has a maximum resolution of

1280 x 1024.

Install the ServTray in racks or cabinets that are 23.7"D to 45.3"D (60.2 to 115.1 cm). Before installing the ServTray, you’ll need a

Universal Rear Bracket Extension Kit (described in Section 2.3).

A single-port KVM module is included with the ServTray. To control more than one PS/2 server, connect the ServTray to a

ServSwitch

™

The KVM module comes with a universal Centronics 36-pin connector; use it to connect the module to the console drawer. On

the opposite side of the KVM module are two 6-pin mini DIN connectors and one HD15 connector to connect directly to a PS/2

computer or to a ServSwitch console ports. Finally, the module has a barrel connector for power. The 0.12" x 0.24" screws listed

in Section 2.2 secure the Universal Rear Bracket Extension Kit to the KVM module. The 0.19" x 0.43" screws are used in place of

10-32 or 12-24 screws if required by your rack.

1U slide drawer with

keyboard (Japanese

version), touch pad, and

15" or 17" LCD monitor

KVM

module

Universal rear bracket

extension kit

Figure 2-1. ServTray components (left to right): Universal Rear Bracket Extension Kit, KVM Module, and 1U slide drawer.

2.2 What’s Included

• (1) ServTray console (15" or 17" LCD panel, keyboard [Japanese version], and mouse pad)

• (1) KVM module with power supply

• (1) Universal rear bracket extension kit

• (1) PS/2 CPU cable

• (10) 0.19" x 0.43" (0.5 x 1.1 cm) screws

• (10) 0.12" x 0.24" (0.3 x 0.6 cm) screws

• This user’s manual

Accessories that you might or need to purchase include:

• 12-24 or 10-32 nuts/bolts