Specifications

724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 15
Chapter 3: Assembly and Installation
8. Once the ServTray is installed in the rack or cabinet, you can connect it to a computer. The KVM module’s connectors attach to
the KVM connectors on a PS/2 CPU via the CPU cable (included) shown in Figure 3-11.
This side attaches to the
ServTray unit’s KVM module
This side connects
to the computer/server
HD15 male
connector
(2) 6-pin mini DIN
male connectors
CPU cable (included)
Figure 3-11. Cable for connecting the KVM module to a computer.
9. Connect the power supply to the power jack on the switch module. See Figure 3-12.
Power
connector
Figure 3-12. Attaching the power supply to the module.
To replace a module, follow Steps 5 and 6 on pages 13–14.