Technical data

44
CONTROL SOFTWARE FOR SCSI EXTENDER AND SWITCHES
Switches and Extender: No devices were detected Error 10101. This message appears
after scanning for online devices.
Common reasons for the message:
• The hardware is not connected to the RS-232 serial port.
• The hardware is turned off.
• Communication-port settings are not correct.
• Make sure the comm port and baud rate are properly defined.
• Serial cable unplugged from the PC or BLACK BOX hardware.
• Bad serial cable.
Switches and Extender: Would you like to work off-line?
This message immediately
follows the No devices were detected message when scanning for active devices.
Selecting Yes will initiate an offline session. Selecting No will open the software
with no device windows present. The following screen shows the software status
after selecting No. You can establish a new online session or offline session using
the File menu option.
Figure 11-1. Software status screen after selecting No.