Technical data

37
CHAPTER 8: SCSI Fiber Optic Extender Control: Offline
• This is an off-line session—self test will be simulated... This message appears
when you click the Self-Test button on the main screen. The test will simulate
the actual test by blinking three times and then indicate a successful test by
turning green. In addition, this screen of test results will appear:
Figure 8-2. Self-Test screen.
NOTE
Self-tests will never show a failure in an offline mode.
• Sorry—you must be on-line to log errors. This message will appear when
clicking the Start Error Logging button after the Enable Error Logging option
has been turned on through the Configure menu. Offline sessions have no way
to trap errors, since the Extenders are not connected to the software.