Technical data

CONTROL SOFTWARE FOR SCSI EXTENDER AND SWITCHES

7.4 Configuration Screen Options

If you select “Options” under the “Configure” heading in the main online menu

for the Extender, the Extender’s Configuration screen appears:

Figure 7-3. Extender Configuration screen.

It will give you information about the Extender and you can use it to set a few

configuration options.

• Model, Serial Number, and Date of Manufacture are all pulled from the

hardware and displayed for informational purposes.

• Firmware Revision is also pulled from the hardware and is displayed for

informational purposes.

• Terminator: Displays the current settings on the Extender for termination.

Factory setting is ON for termination and this should be the setting for most

installations.

• Temperature: Displays the current temperature of the unit. The temperature

is constantly updated to reflect the real-time temperature of the Extender. The

software will immediately indicate a change in temperature.

• Front Panel Locked: When checked, the front panel of the Extender will be

locked so no changes can be made. This also locks the software’s front panel

from allowing changes.