Technical data

24
CONTROL SOFTWARE FOR SCSI EXTENDER AND SWITCHES
Alarm:
Provides alarm information for failures and allows the user to set the temperature
threshold on the unit. Each indicator when lit represents a failure with the
corresponding item. Disabling the audible alarm will turn off the beeping the
switch creates when an alarm is triggered. The following is an example of the
options available:
Figure 5-6. Configuration screen, Alarm tab.
Port Names:
This is used for information purposes only, so connected devices can be documented.
The information is stored in the Switch itself, so you can access it from multiple
Control Software locations if needed. This is most helpful when connecting
through a LAN to make sure users understand what is connected to a given switch.
Figure 5-7. Configuration screen, Port Names tab.