Technical data

Using Serial Server Manager
Documentation Number: LES40xA-1105m Chapter 4 29
Black Box Corporation - 1000 Park Drive - Lawrence, PA 15055-1018
www.blackbox.com -- Tech Support and Ordering: 724-746-5500 - Fax: [phone]
Configure Server Properties
The Server Properties window displays the current configuration
properties for the currently selected server.
Step 6: To open the Server Properties window, highlight the Serial Server
in the
Serial Server List window, double-click to open.
The
Server Properties window is used to configure and store the
Server configuration settings. Details for setting Properties are
described in the next chapter.
Figure 22. The Server Properties Window
N
N
o
o
t
t
e
e
:
:
Serial Server Manager Navigation:
- Use the mouse to select the property and parameters or
- Tab to move to the next property
- Tab+Shift to move back to previous property
- Arrows to move between properties or change values or contents of the
current property
- Enter to select update or cancel
Step 7: After configuring as needed, click Update to store the configuration
in the server.
Step 8: Click Yes to restart. A dialogue box will appear indicating the
server is restarting, then a dialogue box will ask whether you want to search
for all reachable servers again.
Step 9: Click
Yes.
Using Serial Server Manager
Documentation Number: LES40xA-1105m Chapter 4 30
Black Box Corporation - 1000 Park Drive - Lawrence, PA 15055-1018
www.blackbox.com -- Tech Support and Ordering: 724-746-5500 - Fax: [phone]
After the port has been updated you may want to re-enter Server Properties
to verify the changes have taken effect, or to view/change the configuration
of other ports. Each port must be configured separately.