Specifications

21
CHAPTER 4: Installation
4. Installation
4.1 Operating System Installation
4.1.1 F OR W INDOWS U SERS
Start by choosing Install Software at the beginning of
the CD. Choose Asynchronous COM: Port Software,
SeaCOM.
4.1.2 O THER
O PERATING S YSTEMS
Refer to the appropriate section of the Serial Utilities
Software.
4.2 System Installation
The RS-232/422/485 2-Port PCI Card, Opto-Isolated
can be installed in any of the PCI expansion slots and
contains several jumper straps for each port that must be
set for proper operation.
1. Turn off PC power. Disconnect the power cord.
2. Remove the PC case cover.
3. Locate an available PCI slot and remove the blank
metal slot cover.