Owner's manual

10
CHAPTER 1: HEADLINE
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.8 77.87 7. 2269
CHAPTER 3: INSTALLATION
3.2 INSTALLATION STEPS
1. Power up your KVM Switch by connecting the external power adapter to it.
2. Connect the shared USB keyboard, mouse, two DisplayPort monitors, speaker/headphone and microphone to corresponding ports on
the console section of the KVM Switch.
NOTE: The lower two USB ports are for keyboard and mouse.
HUB
DC 9V
A
A
B
B B
Keyboard
Mouse
FIGURE 3-2. KEYBOARD AND MOUSE CONNECTIONS
3. Connect each KVM PC port to computers, using two DisplayPort cables (male to male), one USB cable (type A to type B) and one audio
and microphone combo cable (male to male).
4. Connect your USB devices via a USB hub to the USB hub port (on the left).