Switch User Manual

724-746-5500 | blackbox.com

Page 11

Chapter 1: Specifications

Power Requirements — 8 VAC to 24 VAC or 9 VDC to 48 VDC

Power consumption: LES401A: 320 mA @ 12 VDC,

LES402A: 340 mA @ 12VDC,

LES404A: 360 mA @ 12 VDC;

Power supply start-up time: ≤24 ms

Power connector: Terminal block

Size — 1.75"H x 6.1"W x 4.1"D (4.46 x 15.52 x 10.46 cm)

1.2 Default Settings

Baud Rate — 9600

Data/Stop — 8–1

Delimiter HEX 1 — 00

Delimiter HEX 2 — 00

DHCP — Disable

DIP Switch Settings — 1-Port Serial Server: 1=Run, 2=DB9;

2- or 4-Port Serial Server: Run

Flow Control — None

Force Transmit — 0 ms

Gateway — 192.168.0.254

IP Address — 192.168.0.1

MAC Address — Fixed (see bottom label on unit)

Maximum Connection — 1

Net Mask — 255.255.255.0

Password — Blank

Parity — None

Server Name — 1_Port, 2_Port, or 4_Port

Serial Number — xxxxxxxxx (printed on bottom of unit)

Serial Port Mode — RS-232

Serial Server Port — 1

Serial Timeout — 0 seconds

TCP alive timeout — 0 minutes

TCP/UDP Port — Port 1: 4000;

Port 2: 4001;

Port 3: 4002;

Port 4: 4003

Remote IP Address — 255.255.255.255

RS-232 Connection Mode — Server

TCP/UDP Protocol — 1-Port Serial Server Port 1: TCP;

2-Port Serial Server Ports 1 and 2: TCP;

4-Port Serial Server Ports 1–4: TCP

Version and Date — Current firmware version number and date