User's Manual

Front / Rear Panel Description

Front Panel

1. LCD Display - displays amplifiers operating parameters and menu system

2. Standby / On - In standby the amplifier does not amplify the incoming signal. Menu adjustments can

be made in this mode

3. OK /SSB - Menu setting conformation and SSB RTX delay ’on’ / ’OFF’, if the amplifier is used in

VOX mode

4. SET - Menu Switch

5. AUT / MAN - Auto or manual band filter mode

6. BAND - Manual band filter selector

7. MAIN - primary AC ’ON’ / ‘OFF’ switch

8. Output Power Meter

9. ON - Amplifier active LED

10. TX - Amplifier in Transmission LED

11. Warning - Alarm LED. Illuminates when there is an alarm condition, excessive temperature / antenna

SWR etc.

12. MAN - When manual filter selection is selected this LED will illuminate

Rear Panel

1. ANT - SO239 Antenna Output connector

2. RTX - SO239 Transceiver input connector

3. ALC - ALC output level adjustment

4. ALC - ALC output connector RCA / Phono socket

5. PTT - PTT Input Connector RCA / Phone socket (Active Low)

6. IEC European AC input socket

7. AC Fuse receptacle (2x4A (230Vac) 5x20mm, Fast, glass fuses)