Specifications

ES10/ES26 Page 31/104
Document status: released Operating Manual rev. 01, 03.11.08
4.5 Front Panel
Figure 4.5.1 shows an example of the front panel view of the ES10/ES26. The RF-input and the
optical connectors are optionally available on the rear panel.
Item # Function
1 RF-input (optionally available on rear side)
2 RF-monitor output
3 Status LED’s
4 Liquid Crystal Display
5 Push button field for local set-up of transmitter
6, 7 Optical connectors (optionally available on rear side)
4.6 Rear Panel
The rear panel is described in the following list:
Item # Function
1 RF-input (optional located on front panel)
2, 3 Optical fiber outputs (optional located on front panel)
4 Not used in ES10/ES26, cover
5 I/O ports
6 RS485 interface (RJ-45 female): a-versions: master; b-versions: slave
7 RS232 interface (SUB-D9 male)
8 a-versions: Ethernet interface; b-versions: RS485 slave interface (RJ-45 female)
9 2 green LEDs Ethernet link & data (a-versions only)
10, 11 power supply + fan modules (field replaceable)