Specifications

ES10 Page 98/100
Document status: Released Operating Manual rev. 07, 25.09.13
10 RELEASES
10.1 ES10 Hardware Releases
10.1.1 Hardware Releases for ES10La/ES10XLa
Rel. Date Description
3.0 June 2008 First delivered release of optical transmitter
4.0 Feb 2010 New SBS Board layout
5.0 June 2011 - EMC optimized
- F-connector type changed
- Redesign of LED label
6.0 May 2013
supports new Flash Memory types
- advanced monitoring of the RF-Signal Path
- SBS Modul: Power consumption reduced, additional monitoring functions integrated
10.1.2 Hardware Releases for ES10Lb/ES10XLb
Rel. Date Description
3.0 June 2008 First delivered release of optical transmitter
4.0 Feb 2010 New SBS Board layout
5.0 June 2011 - EMC optimized
- F-connector type
changed
- Redesign of LED label
6.0 May 2013
supports new Flash Memory types
- advanced monitoring of the RF-Signal Path
- SBS Modul: Power consumption reduced, additional monitoring functions integrated
10.2 ES10 Software Releases
10.2.1 Application Software Releases for ES10La/ES10XLa
Rel. Date Description
3.0 June 2008 First delivered release of optical transmitter
3.1 July 2008 - Improved LD temperature control
- Improved pilot CSO control
- Improved fan control
3.2 Nov 2008 Not public
3.3 Nov 2008 Not public
3.4 Nov 2008 - Improved Start-up sequence
- Disabled OMI and RFin Alarm during start-up
3.5 May 2009 Not public
3.6 Aug 2009 - Protection of the cyclic laser temperature control call
- Enhanced fan regulation
3.7 Feb 2010 New Firmware to support the new SBS Board
3.8 June 2011 Enhanced OMI variation range
3.12 May 2013 New firmware to support hardware changes
3.13 September 2013
Higher flexibility in supporting SBS supervising IC