Specifications

ES10 Page 94/100
Document status: Released Operating Manual rev. 07, 25.09.13
With this feature all warnings / alarms of the ES10 can be either enabled or disabled by the user
in relation to the LEDs on the front panel, the Webserver status screen and SNMP interface. If the
alarm/warning mask is applied a notify message will be shown on the status page (ref. to 6.1).
6.8 Properties Menu
The properties page of the ES10 provides an overview of the transmitter properties such as
hardware model, hardware release, serial number and the software releases. Optionally an
aliasname and some user data may be edited. The aliasname occurs in the Devices menu of all
web browser displays as well as in the LCD.
3.13
13. Sept 13
Fig. 6.8.1: Properties menu of ES10
The miscellaneous button can be used to request either a
• reset to factory settings and cold start
• reset of the transmitter (= cold start)
Note: Be very careful in executing these reset commands since they force cold start situation,
where the transmitter might need about 30 seconds to get back to full performance properties.