Specifications

ES10 Page 9/100
Document status: Released Operating Manual rev. 07, 25.09.13
• Laser Safety Classification
WARNING
Class 1M Product.
The device is classified according to the international standard IEC
60825-1:2007; European Version EN 60825-1:2007 and German
Version DIN EN 60825:2008-05). It is assigned to
Class 1M
The laser radiation is emitted in the invisible infra–red spectrum
range. It is potentially hazardous when viewed using an optical
instrument.
Operation and maintenance of the device must only be carried out
by persons who have received adequate training in laser safety. It
must be installed according to BKtel instructions. Use of controls or
adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
NOTICE
Hazard Level 1M
The device may be integrated in an optical fiber communication
system (OFCS) complying with IEC 60825-2. The standard requires
the assessment of hazard levels at all accessible locations as a
replacement for classifications according to IEC 60825-1. If installed
in an OCFS the device optical output port(s) (fiber connector(s)) are
assigned to the
Hazard Level 1M
This hazard level assignment is based on the laser radiation which
is accessible when the optical fiber connector of the output port(s) is
disconnected. The laser radiation is potentially hazardous when
viewed using an optical instrument.
For subsequent accessible locations within the OFCS the
manufacturer of the OFCS is obliged to assign appropriate hazard
levels and to install applicable laser safety measures according to
IEC 60825-2.